Tecno Spark Go 3 Pro
-
Processor Unisoc T615
-
Display 6.67 inches
-
Battery 6000 mAh Li-Po, non-removable
-
Camera 50 MP
Compare Tecno Spark Go 3 Pro
Key specs at a glance
Tecno Spark Go 3 Pro: At a Glance
Tecno Spark Go 3 Pro has a 6.67-inch IPS LCD display, the Unisoc T615 chipset, a 50 MP main camera and a 6000 mAh battery.
Release Status
Available. Released 2026, October
RAM & Storage
64GB 4GB RAM, 128GB 4GB RAM (eMMC 5.1)
Operating System
Android 16 (Go edition), HIOS 16
Selfie Camera
8 MP, f/2.0, (wide)
Show 7 more key specs
Resolution
720 x 1600 pixels, 20:9 ratio (~263 ppi density)
Dimensions & Weight
165.6 x 77.0 x 8.15 mm (6.52 x 3.03 x 0.32 in) | 192 g (6.77 oz)
Connectivity
Wi-Fi 802.11 a/b/g/n/ac, dual-band, BT 5.2, A2DP, LE, USB Type-C 2.0, OTG
Display
6.67 inches, 107.4 cm2 (~84.2% screen-to-body ratio) - IPS LCD, 120Hz
Processor (SoC)
Unisoc T615 (12 nm)
Rear Camera
50 MP, f/1.8, (wide), PDAF + 0.08 MP (auxiliary lens)
Battery & Charging
6000 mAh | 18W wired
Specs
Network
| Technology | GSM / HSPA / LTE |
|---|---|
| 2G Network GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 (dual-SIM) CDMA 800 / 1900 | GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2 |
| 3G Network | HSDPA 850 / 900 / 2100 |
| 4G Network | 1, 3, 5, 7, 8, 20, 28, 38, 40, 41 |
| 5G Network | No |
| Speed | HSPA, LTE |
LAUNCH
| Announced | 2026, October 05 |
|---|---|
| Status | Available. Released 2026, October |
BODY
| Dimensions | 165.6 x 77.0 x 8.15 mm (6.52 x 3.03 x 0.32 in) |
|---|---|
| Weight | 192 g (6.77 oz) |
| Build | Glass front, plastic back, plastic frame |
| SIMs SIM (Subscriber Identity Module) is a small card that contains mobile network subscriber's account information. This allows the phone using the card to attach to a mobile network. The SIM card is most commonly associated with GSM and UMTS mobile networks. Moving a SIM card from one phone to another allows a subscriber to switch mobile phones without having to contact their mobile network carrier. SIM cards can also be used by a phone to store limited amounts of data, such as phone numbers and text messages. | Dual SIM (Nano-SIM, dual stand-by) |
| Water Resistant | IP54 dust and water splash resistant |
Display
| Display Type Display Technology => A number of display technologies and types used in mobile phones => TFT (Thin Film Transistor), IPS (In-Place Switching), OLED (Organic Light Emitting Diode), AMOLED (Active-Matrix Organic Light-Emitting Diode), Super AMOLED (an even advanced version of AMOLED), Resistive Touchscreen (Resistive touchscreens contain two layer of conductive material with a very small gap between them which acts as a resistance), Capacitive Touchsceen (Capacitive touchscreen technology consists of a layer of glass coated with a transparent conductor) | IPS LCD, 120Hz |
|---|---|
| Size | 6.67 inches, 107.4 cm2 (~84.2% screen-to-body ratio) |
| Resolution | 720 x 1600 pixels, 20:9 ratio (~263 ppi density) |
| Protection Display Protection => Gorilla Glass is a special alkali-aluminosilicate glass shield with exceptional damage resistance that helps protect mobile displays from scratches, drops, and bumps of everyday use, It is always better to go for a smartphone with Gorilla Glass for that added protection and peace of mind. | Scratch-resistant glass |
PLATFORM
| Operating System OS => Every computer system run on a base software called Operating System (OS). Operating System controls all basic operations of the computer (such as smartphone, PDAs, tablet computers and other handheld devices). The Operating System allows the user to install and run third party applications (apps), apps are used to add new functionality to the device. | Android 16 (Go edition), HIOS 16 |
|---|---|
| Chipset Chipset is a group of integrated circuits designed to perform one or a more dedicated functions, often with real time computing constraints, Popular smartphones are equipped with more advanced embedded chipsets that can do many different tasks depending on their programming. | Unisoc T615 (12 nm) |
| CPU CPU (Central Processing Unit) mostly known as processors, CPU processes instructions in order to carry out certain functions that make your device operate properly. Processors are often described as the brain of computers, smartphones and tablets, Smartphones and tablets rely on processors to carry out their every task, Processors are an incredibly important factor in selecting any type of computing device, including your smartphone. | Octa-core (2x1.8 GHz Cortex-A75 & 6x1.6 GHz Cortex-A55) |
| GPU GPU (Graphics Processing Unit) is a single-chip processor designed to rapidly manipulate and alter memory to accelerate the creation of images in a frame buffer intended for output to a display, This includes things such as lighting effects, object transformations, and 3D motion. | Mali-G57 MP1 |
MEMORY
| Card Slot Memory Card Slot is a special slot for inserting a memory card. Memory cards allow you to expand the phone's built-in memory, A memory card (sometimes called a flash memory card or a storage card) is a small storage medium used to store data such as text, pictures, audio, and video, for use on small, portable or remote computing devices such as mobile phones, mp3 players, digital cameras. | microSDXC (dedicated slot) |
|---|---|
| Internal | 64GB 4GB RAM, 128GB 4GB RAM (eMMC 5.1) |
MAIN CAMERA
| Cameras Specs Today’s smartphones come equipped with a very comprehensive set of camera related specifications. Our smartphone, for many of us, has become our primary camera due to it being the one we always have with us. |
50 MP, f/1.8, (wide), PDAF 0.08 MP (auxiliary lens) |
|---|---|
| Camera Features | Dual-LED flash, HDR |
| Video | 1080p@30fps |
SELFIE CAMERA
| Cameras Specs Today’s smartphones come equipped with a very comprehensive set of camera related specifications. Our smartphone, for many of us, has become our primary camera due to it being the one we always have with us. | 8 MP, f/2.0, (wide) |
|---|---|
| Features | Dual-LED flash |
| Video | 1080p@30fps |
SOUND
| Loudspeaker | Yes, with dual speakers |
|---|---|
| 3.5mm jack | Yes |
COMMS
| WLAN | Wi-Fi 802.11 a/b/g/n/ac, dual-band |
|---|---|
| Bluetooth Bluetooth is a wireless communications technology for exchanging data between mobile phones, headsets, computers and other network devices over short distances without wires, Bluetooth technology was primarily designed to support simple wireless networking of personal consumer devices. | 5.2, A2DP, LE |
| Positioning | GPS, GLONASS, GALILEO, BDS |
| NFC NFC (Near field communication) is a set of standards for smartphones and similar devices to establish peer-to-peer radio communications with each other by touching them together or bringing them into proximity, usually no more than a few inches. | No |
| Infrared Infrared connectivity is an old wireless technology used to connect two electronic devices. It uses a beam of infrared light to transmit information and so requires direct line of sight and operates only at close range. | Yes |
| Radio | FM radio |
| USB | USB Type-C 2.0, OTG |
Features
| Sensors Sensors are electronic components that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure and location, The output is generally a signal that is converted to use in computing systems, a location sensor, such as a GPS receiver is able to detect current location of your electronic device. | Fingerprint (side-mounted), accelerometer, proximity |
|---|
BATTERY
| Battery Type Battery Type => Cell phones run on various kinds of batteries depending on the manufacturer, phone size or shape and features. There are basically four types of cell phone batteries => Lithium Polymer, Lithium Ion, Nickel Metal Hydride and Nickel Cadmium. | Li-Po, non-removable |
|---|---|
| Capacity Battery Capacity is a measure (typically in Amp-hr) of the charge stored by the battery, and is determined by the mass of active material contained in the battery. The battery capacity represents the maximum amount of energy that can be extracted from the battery under certain conditions. | 6000 mAh |
| Placement | Not specified |
| Charging The functionality responsible for recharging batteries in portable devices, such as mobile phones, significantly influences both battery lifespan and the practicality of daily product usage.The charging process, encompassing factors like voltage, current, and completion actions, is contingent upon the battery's size and type.Contemporary battery chargers dynamically adjust charging parameters based on the battery's current charging state. Charging an empty battery poses no safety risk, allowing for a quicker charging process. Consequently, many charging speed benchmarks, including ours, specify the battery level achieved after a 30-minute session on an empty battery.Standard chargers with a power output of 5V/1A, equivalent to 5W, serve as a baseline, with anything surpassing this speed classified as quick or fast charging. | 18W wired |
MISC
| Colors | Startrail Black, Glittery White, Magic Skin Green, Mystery Blue |
|---|---|
| Model | KL4p |
| SAR SAR (Specific absorption rate): Each GSM handset has a radio transmitter and receiver in order to operate in the wireless GSM network. That transceiver is manufactured so that when used next to the ear and when worn on the belt, it won't exceed the limits for exposure to radio frequency energy set by the authorities.The authorities in question here are the Federal Communications Commission (FCC) of the U.S. Government, Industry Canada of the Canadian Government (IC), and the Council of the European Union. | 0.90 W/kg (head), 1.13 W/kg (body) |
| SAR EU Each GSM handset has a radio transmitter and receiver in order to operate in the wireless GSM network. That transceiver is manufactured so that when used next to the ear and when worn on the belt, it won't exceed the limits for exposure to radio frequency energy set by the authorities.The authorities in question here are the Federal Communications Commission (FCC) of the U.S. Government, Industry Canada of the Canadian Government (IC), and the Council of the European Union. | 0.85 W/kg (head), 1.19 W/kg (body) |
| Price | $99.00 / ₹7,999 / NGN 139,000 |
TESTS
| Performance | AnTuTu: 288,000 (v10) | GeekBench: 1,390 (v6) |
|---|---|
| Display | 640 nits max brightness (measured) |
| Loudspeaker | Not specified |
| Battery (new) | Active use score 16:10h |
Reasons to Buy (Pros)
- Sub-$100 entry smartphone packing a 6,000 mAh battery and 18W USB-C charging
- 6.67-inch 120Hz punch-hole screen with Dynamic Port notifications
- Stereo speakers with DTS audio, IR blaster, 3.5mm headphone jack, and dedicated microSDXC slot
- 50MP main rear camera with dual-LED flash plus 8MP front camera with front flash
Reasons to Avoid (Cons)
- 4G-only Unisoc T615 processor with 4GB physical RAM
- 720p HD+ resolution
- No NFC
The Tecno Spark Go 3 Pro is a Tecno smartphone that pairs a 6.67 inches, 107.4 cm2 (~84.2% screen-to-body ratio) (IPS LCD, 120Hz) display with the Unisoc T615 (12 nm) processor. Announced in 2026, October 05 (Available. Released 2026, October), the device is positioned for buyers looking for a competitive option around 99.
Design and Display
On the outside, the Tecno Spark Go 3 Pro measures 165.6 x 77.0 x 8.15 mm (6.52 x 3.03 x 0.32 in) and weighs 192 g (6.77 oz), featuring a Glass front, plastic back, plastic frame construction. The front is built around a 6.67 inches, 107.4 cm2 (~84.2% screen-to-body ratio) IPS LCD, 120Hz panel with a resolution of 720 x 1600 pixels, 20:9 ratio (~263 ppi density), giving users sharp text rendering and smooth scrolling for everyday browsing and media playback.
Performance, Software, and Memory
Powering the Tecno Spark Go 3 Pro is the Unisoc T615 (12 nm) SoC (Octa-core (2×1.8 GHz Cortex-A75 & 6×1.6 GHz Cortex-A55)) paired with the Mali-G57 MP1 GPU. Memory configurations include 64GB 4GB RAM, 128GB 4GB RAM (eMMC 5.1) (Card slot: microSDXC (dedicated slot)). Out of the box, the phone runs Android 16 (Go edition), HIOS 16.
Camera Configuration
For photography, the rear camera setup consists of: 50 MP, f/1.8, (wide), PDAF 0.08 MP (auxiliary lens). Video capture on the main system supports 1080p@30fps. On the front, selfie duties and video calls are handled by a 8 MP, f/2.0, (wide) camera.
Battery Life, Charging, and Connectivity
Battery capacity is rated at 6000 mAh (Li-Po, non-removable), with charging support rated at 18W wired. Connectivity options include Wi-Fi (Wi-Fi 802.11 a/b/g/n/ac, dual-band) and USB Type-C 2.0, OTG.
Tecno Spark Go 3 Pro — Frequently Asked Questions
What processor and storage options does the Tecno Spark Go 3 Pro have?
The Tecno Spark Go 3 Pro is powered by the Unisoc T615 (12 nm) chipset with an Octa-core (2x1.8 GHz Cortex-A75 & 6x1.6 GHz Cortex-A55) CPU and Mali-G57 MP1 GPU. Memory and storage configurations include 64GB 4GB RAM, 128GB 4GB RAM (eMMC 5.1).
What is the battery capacity and charging speed of the Tecno Spark Go 3 Pro?
The Tecno Spark Go 3 Pro comes with a 6000 mAh battery (Li-Po, non-removable) and supports 18W wired.
How good is the Tecno Spark Go 3 Pro camera setup?
On the rear, the Tecno Spark Go 3 Pro features 50 MP, f/1.8, (wide), PDAF | 0.08 MP (auxiliary lens). It supports video recording at 1080p@30fps. For selfies, it includes a 8 MP, f/2.0, (wide) front camera.
Does the Tecno Spark Go 3 Pro support 5G, NFC, and a headphone jack?
Network connectivity on the Tecno Spark Go 3 Pro includes HSPA, LTE. NFC support: No. 3.5mm headphone jack: Yes.
What is the price and release status of the Tecno Spark Go 3 Pro?
The estimated retail price of the Tecno Spark Go 3 Pro is around $99. Market status: Available. Released 2026, October. Available colorways include Startrail Black, Glittery White, Magic Skin Green, Mystery Blue.
Reviews
Disclaimer Note
We strive to maintain accurate and up-to-date content on our website for general information purposes only. Please refrain from using the material for business, legal, or any other decisions.
